Imperial Solar Post Cap Light - Black with 3x3 Adapter

Easy to Install:  Measure your post for the best fit. This solar post cap light will accommodate a true 2", 2-1/4", and 2-1/2" post simply by adding or removing the included adapters. An additional 3x3 adapter is included for 3" posts.  

Easy Maintenance: For longest run times and best overall performance make sure your light can receive at least 4 to 6 hours of bright direct sunlight to charge the battery. More sun exposure will equal longer run times. Replace rechargeable battery every 1-2 years or as needed.

Shipping: This item typically ships by the next business day via UPS. Please provide a physical shipping address to avoid shipping delays.

Product Details

• Qty: 1 ea Solar Post Cap Light and 3x3 adapter
• Designed specifically for steel and aluminum posts.
• Solid cast aluminum construction with black powder coat finish
• Lights up automatically every night
• High-output surface mount LED technology
• Choose between warm and cool white light modes - includes Warm/Off/Cool switch
• 10 Lumens / Warm natural light 2700-3200 Kelvin OR cool white light 4500-5500 Kelvin
• Includes adapters to fit a variety of 2x2 to 3x3 posts
  • Base opening measures: 2-5/8" x 2-5/8"
  • Includes 2 adapters: 2.25"x2.25" and 2"x2" 
  • Includes an additional black 3"x3" adapter, (packaged separately).
• 1 long life AA Ni-MH rechargeable battery included
• *Included rechargeable battery or batteries not covered under manufacturer's warranty. 
  

How to install to a 3x3 Post:

Note: This product arrives as a 2x2 fixture with two adapters (2" 2-1/4") that fit inside the base. A separate 3x3 adapter is included. Below are instructions to install the 3x3 adapter to the fixture and to your post:

1. It's best to start by installing the 3x3 adapter/base to your post. The little metal tabs or bumps are there to secure a compression fit onto the post.
2. Using your hands (or a soft mallet) attach the 3" adapter until it covers your post by 1/2". 
3. Remove the preinstalled 2-1/4" x 2-1/4" adapter (a square ring inside the bottom of the light) from the 2x2 solar cap. Opening will be 2-5/8" square.
4. Place the 2x2 light over the 3x3 adapter.
5. Once secured, the post cap can be attached to the adapter by using exterior- grade caulking, if needed.